|
|
A jetted tub will lose heat much more rapidly than a standard bath tub will. A bath heater solves this problem by automatically maintaining the water temperature in the comfortable range of around 102° to 104°.
This heater is designed to work only with the Balboa Prestige control system. This system has been used by a number of bath manufacturers.
This heater is includes a pressure switch with a plastic cover.
Heater end pieces are not included but this should fit the original end pieces with no problem.
Model No: D1100-0107 is shown on the label
Balboa Model No 50090 is also shown on the label.
| |
|
| Electrical: |
8.3 Amps, 115 Volts, 50/60 Hz |
|
1000 Watts, 3422 BTU |
| |
|
| Plumbing: |
Heater plumbing nuts are included |
|
(Threads actually measure about 2-7/16" diameter) |
|
|
There are 2 heaters used with the Prestige system. This is the
T-Style version. For the flow thru version, click the link below.
Flow Thru Style, Model # 50100
|
