Hydroquip Pure Heat Jetted Bath tub heater, Model PH301-15UV

(Click the image for a larger view)

What is the Comfort Zone?

This is the water temperature range that allows the bather to enjoy a bath that will not become too cool or too hot.

A bath heater that utilizes Certified Real Heat™ technology automatically maintains the bath water between the comfortable temperatures of 102.5°F and 104°F.

Unlike alternative heating or tub insulation technologies that merely slow the rate at which the water cools, the 100% efficiency of Hydro-Quip’s exclusive CRH™ keeps your bath water in the Comfort Zone indefinitely.

Many health experts maintain that a bather should allow a minimum 20 to 30 minute soak to derive the maximum benefits of hydrotherapy massage.

Product Features

Smart Thermostat – Insures heating element operates only when the water temperature drops below 102.5° F. Provides constant, comfortable water temperature.

Certified Real Heat™ Technology – 100% efficient element to water heat transfer. No wasted energy consumption.

Stainless Steel heater housing - Corrosion resistant heater housing

Intelligent High Limit Switch – The ultimate safety switch, it matches an auto-reset high limit with an additional manual reset switch. If the high limit switch is ever activated due to extreme temperature, the Intelligent High Limit switch can be manually reset assuring you continued safety.

Heater “On” Light – Provides a visual indicator that the heater is operating and raising the temperature of the water.

100% Quality Assurance – Every component and every complete heater assembly is put through a battery of pre and post production quality tests for guaranteed reliability.
Made in America – Manufactured in Corona, California by a dedicated group of quality minded men and women.

Dimensions

Click the image for a larger view	Top View

Click the image for a larger view	Side View

Items Included

This unit includes all the items needed to
install it in either 1-1/2" or 2" plumbing.

Items Included:

	2	Union ends for 1-1/2" pipe
	2	Union ends for 2" pipe
	2	Union gaskets
	1	8 Foot roll of #8 AWG bonding wire
	1	3 Foot grounded cord - already installed

Sizing Chart


	Series	Gallons	BTU	Amps	Watts
Standard Bath	1000	Up to 60	3422	8.3	1000
Large Bath	1500	Up to 100	5133	12.5	1500
To determine gallons: Measure in feet - Length x Width x Depth (To overflow drain) x 7.5

Installation Manual / Other Models

Click the link below for a copy of the
installation manual in Acrobat® PDF format

Pure Heat Installation Manual

There are a number of different models available.
Click this line to see our main bath heater page.

Main Page

Hydroquip Pure Heat
Model PH301-15UV

120 Volt, 1500 Watt, 12.5 Amp
Jetted Bath tub heater

Hydroquip Pure Heat Model PH301-15UV

120 Volt, 1500 Watt, 12.5 Amp Jetted Bath tub heater

Hydroquip Pure Heat
Model PH301-15UV

120 Volt, 1500 Watt, 12.5 Amp
Jetted Bath tub heater