PoolandSpaStuff.Com

 
Contact Us Site Map
 
<< Previous page - Next page >>
The current page is - Filter Parts > Splash Pak > 42-3570-04-R

Splash-Pak 42-3570-04-R DE Filter Grid
Used in the DE 40


(Click here for a larger view)


Side View

Dimensions


42-3570-04-R DE Filter Grid
Qty:  Price: $33.95

 
Dimensions and Specifications
  Height: 12" (Top of grid body)
  Height:
12-3/4" (Top of center rod)
     
  Width: 7 "
Thickness: 7/16" (Flat portion of body)



This is one of the 2 grid sizes used in the Splash Pak DE 40 filter. 4 of the 8-1/2" wide and 2 of the 7" wide grids are used in each filter.

This is flat, with a round black connection tube about
1" in diameter running top to bottom, close to the center. The body consists of a plastic frame about 7/16" thick with filter material attached on the outside. The dimensions shown are for the plastic frame, so the actual measurements of the grid will be slightly larger.



Additional Parts

The DE 40 filter was made by Jacuzzi under the Splash Pak brand name. This is the same filter internally as the Jacuzzi Landslide LS-40. The only difference is the filter tank, which is black in the LS-40 and gray in this filter.


For ease of use we list parts for both of these filters.
For additional parts, see the 2 links just below.


Jacuzzi LS-40 parts

Splash Pak DE 40 parts
Connector Details


The grids attach to the bottom manifold with the round connector shown above. The connector is black plastic and extends about 3/4 inches beyond the end of the grid. There is a slot about 1/4 inch wide on one side.



  If you can not find what you are looking for, please e-mail
us and we will be glad to help you find what you need.