PB913N
120 Volt, 24 Hour
|
|
This is a 24 hour timer which may be used for multiple timing configurations.
There are 48 individual trippers on the front dial. Each tripper controls a 30 minute section of the day. The on time is controlled by pulling each 30 minute tripper outward from the face with a minimum of 1 hour "On time" per cycle.
This unit requires 120 volts to control the timer motor.
| Dimensions: |
Height: 3-1/4" |
|
Width: 2-3/4" |
|
Case only depth: 1-5/8" |
|
. |
| Load Rating: |
20 Amps resistive - 120-277 volts |
| Motor Voltage: |
120 Volts |
| Timing Cycle |
24 hour timer dial |
|
48 timer pegs - 30 minute per peg |
|
Minimum On time - 1 hour |
|
Maximum On time - 23 hours |
| Agency Approval: |
UL, CSA |
|
